1.4 CEUs | Monday–Tuesday, March 23–24, 2020
- Aaron Budge, Ph.D., P.E., M.ASCE
- Jerry A. DiMaggio, P.E., D.GE, M.ASCE
- Mohamad H. Hussein, P.E., M.ASCE
Great presentations from engineers who literally wrote the book! — Anthony Telesco, Geotechnical Engineer, Jacobs, Boston, MA
Purpose and Background
The purpose of this seminar is to present modern techniques for the design, installation, and verification of deep foundations. Over the past twenty-five years, major changes have occurred in the deep foundations industry. New improved methods have been developed for installing all types of deep foundations, increased loads are being used, and new quality control procedures have been developed. For driven piles, higher loads can be achieved with new hammers, dynamic quality control methods have been adopted, wave equation analysis is being widely used, and higher strength materials are becoming common. Auger-cast piles are being used with increasing frequency. High capacity drilled shafts are being utilized more frequently. New design and specifications have been adopted in many codes and specifications. This seminar will present modern design procedures for deep foundations including discussions on new developments.
- Find out the latest subsurface investigation methods for deep foundation design.
- Understand the fundamentals of the design process for deep foundations.
- Learn the new standards and procedures for the design and installation of deep foundations.
- Learn the use of wave equation analysis as applied to both the design and installation of driven piles including driving problems.
- Understand the various capacity determination methods including both static and dynamic methods.
- Receive state-of-the-art design and construction manuals for all types of deep foundations systems.
This seminar presents modern techniques for the design, installation, and verification of Deep Foundations. Throughout the last two decades major changes; for example, LRFD and computer software, have occurred in the deep foundations industry. New improved methods have been mainstreamed into practice for the design and installation of all types of deep foundations. Upon completion of this seminar, you will be able to:
- Understand the minimum recommendations for site investigations, laboratory and in-situ test methods and property selection guidance for deep foundations design and construction.
- Select the appropriate deep foundation systems and assess the appropriate foundation element installation equipment and construction procedure.
- Conduct design and analysis of single piles and pile groups subject to axial and lateral loads and moments.
- Apply the use of wave equation analysis for the design and installation of driven piles.
- Understand and specify the use of static and dynamic testing and monitoring methods for structural integrity and geotechnical, load carrying capacity.
- Select the key project variables and requirements within construction specifications and plans for deep foundations
- Communicate the advantages and disadvantages of various deep foundation types.
Assessment of Learning Outcomes
- Attainment of the learning outcomes will be addressed via in-class handouts and discussions of example problems and software demonstrations.
- Frequent classroom question and answer discussions are encouraged at the conclusion of each presentation.
Via email, approximately 5 days prior to the seminar, each attendee will receive the FHWA comprehensive manuals Design and Construction of Driven Pile Foundations, Drilled Shaft: Construction Procedure and Design Methods and Design and Construction of Continuous Flight Auger Piles.
Who Should Attend?
Geotechnical engineers, construction engineers, contractors, structural engineers, owners, or any professional involved in the design, construction, inspection, testing and specification of deep foundations (driven piles, cast-in-place piles, or drilled shafts).
Day 1 | Time: 8:30 a.m. – 4:30 p.m.
- Welcome and Introduction
- Overview of Deep Foundation
- Design and Construction:
- The design process will be reviewed for all types of deep foundations and the satisfaction of code requirements will be discussed.
- Subsurface Investigation for Deep Foundations:
- Subsurface investigation methods
- Evaluation of subsurface investigation methods
- Computation of Capacity and Settlements:
- Driven piles
- Drilled shafts
- Driven Piles and Pile Installation Equipment:
- Driven pile types
- Pile driving hammers including new hydraulic hammers
- Lead systems and accessories
- Drilled Shaft and Augercast Installation:
- -Methods of installation and influence of installation methods on deep foundation performance
- Wave Equation Analysis Workshop:
- Bearing graph and chart generation for inspectors
- Driveability evaluation, pile setup, and relaxation
Day 2 | Time: 8:30 a.m. – 4:30 p.m.
- Design for Lateral Loading and Pile Groups
- Computer Software for Deep Foundations Design and Analysis
- Quality Control of Deep Foundations:
- Methods of installation control
- Techniques for evaluation of the installed end product
- Conventional Static Loading Tests:
- Load testing methods
- Evaluation of load tests
- Dynamic Testing for Capacity:
- Equipment for high strain dynamic testing
- Methods for evaluating dynamic measurements for capacity including Case Method and CAPWAP
- Pile driving evaluation
- Capacity evaluation of cast in place piles
- Other Testing Methods:
- Bottom-Up load testing
- Rapid load testing
- Methods & evaluation of results
- Planning an Effective Field Testing Program
- Summary and Conclusion
Decided which seminars you'd like to take? Register now!