Schedule-at-a-Glance

(Subject to change)

Monday, September 20

9:00 a.m. – 5:30 p.m. ET | Pumping Systems Hydraulic Design for Civil Engineers
**Special note: This course is a one-day 8-hour course.
11:00 a.m. – 3:30 p.m. ET | CM-at-Risk: Contracting for Owners, Consulting Engineers, and Contractors (Day One)
11:30 a.m. – 4:00 p.m. ET | Earth-Retaining Structures: Selection, Design, Construction, and Inspection (Day One)
12:00 p.m. – 4:30 p.m. ET | Structural Engineering of a 4-Story, Combined Material Building Using the 2018 International Building Code (Day One)

Tuesday, September 21

11:00 a.m. – 3:30 p.m. ET | CM-at-Risk: Contracting for Owners, Consulting Engineers, and Contractors (Day Two)
11:30 a.m. – 4:00 p.m. ET | Earth-Retaining Structures: Selection, Design, Construction, and Inspection (Day Two)
12:00 p.m. – 4:30 p.m. ET | Structural Engineering of a 4-Story, Combined Material Building Using the 2018 International Building Code (Day Two)

Wednesday, September 22

11:30 a.m. – 1:00 p.m. ET | Engineering the Future: Code of Ethics
1:30 p.m. – 5:30 p.m. ET | Practical Drone Use for Diverse Infrastructure Projects – NEW
2:00 p.m. – 4:00 p.m. ET | Leadership Development for the Engineer

Thursday, September 23

11:00 a.m. – 3:30 p.m. ET | Innovative Seismic Design – NEW (Day One)
11:30 a.m. – 4:00 p.m. ET | Ground Improvement Methods: Selection, Design, Construction, and Monitoring/Inspection (Day One)
12:00 p.m. – 4:30 p.m. ET | Streambank Stabilization for Restoration and Flood Control Projects (Day One)
12:30 p.m. – 5:00 p.m. ET | Post-Tensioned Buildings: Design and Construction (Day One)

Friday, September 24

11:00 a.m. – 3:30 p.m. ET | Innovative Seismic Design – NEW (Day Two)
11:30 a.m. – 4:00 p.m. ET | Ground Improvement Methods: Selection, Design, Construction, and Monitoring/Inspection (Day Two)
12:00 p.m. – 4:30 p.m. ET | Streambank Stabilization for Restoration and Flood Control Projects (Day Two)
12:30 p.m. – 5:00 p.m. ET | Post-Tensioned Buildings: Design and Construction (Day Two)

Decided on your courses? Register now!